Before You Launch a Campaign
The checks and settings on a campaign's page to work through before launch: audience quality, mailboxes and limits, auto-ramp, reply rate, openers, reports, approved copy and pre-launch checks.
What to Check Before Launch
Every campaign's page in the Email app has a set of cards for getting it ready to send. This article walks through them in a sensible order: who receives the campaign, which mailboxes send it and how fast, how volume grows, when it pauses itself, what each email says, and the final checks before launch. Nothing on these cards sends an email. Sending only starts when you launch the campaign, and most of the settings can still be changed afterwards. A card that does not apply says so rather than showing empty numbers: the AI openers card, for example, says when the campaign's emails use no AI opener, and where auto-ramp is not yet available on an account, its card says so and that sending is not affected. The cards are the same on every account, so what you read here matches what you see on your own campaigns.
Audience Quality: Who Is Left Out
The 'Audience quality' card leaves riskier addresses out of this campaign. The rules apply when contacts are enrolled, and nobody is deleted from your lists. There are two switches. 'Leave out catch-all addresses' skips addresses on catch-all domains: such a domain accepts every address, so the mailbox cannot be confirmed to exist, and bounces from these hurt your sender reputation. 'Leave out free-mail addresses' skips personal addresses such as Gmail, Outlook or Yahoo rather than the company's own domain. Each switch shows how many contacts in the audience it affects, and a contact that is both is counted once. Choose 'Save' to apply the rules; contacts who are already enrolled stay in their sequence. To leave out one person, open the recipients list, choose 'Exclude from this campaign' next to them and pick a 'Reason': 'Not our audience', 'Supplier or merchant', 'Bad name or contact data', 'Asked not to be contacted' or 'Other'. A note is optional, except for 'Other', and only your team sees it. The contact's lists, other campaigns and contact record do not change. 'Include again' brings one contact back, and 'Include them again' brings back everyone you left out by hand after showing who will be enrolled and who is still left out by a switch.
Mailbox Assignment and Sending Limits
The 'Mailbox assignment' card shows which mailbox will send to each contact. Each contact stays on one mailbox for every step, so follow-ups come from the same sender. New contacts are spread evenly across sending domains, then mailboxes, and only onto domains with room left today. A contact shown as 'Projected' is where they will go if every daily cap has room; the mailbox is fixed when their first email is attempted, after which they show as 'Assigned'. If no mailbox is usable, the card says how many contacts cannot be placed. The 'Sending limits' card controls how many emails the campaign sends each day. 'Campaign daily total' is the ceiling for the whole campaign, 'Per-mailbox cap' the most each mailbox sends for this campaign, and 'Per-domain cap' the most sent from one sending domain; mailboxes on the same domain share that cap, so two mailboxes on one domain with a cap of 2 send 2 in total, not 4. Leave a field empty for no campaign limit; your mailboxes' own daily limits always apply. The 'Configured daily ceiling' estimates the daily ceiling from the campaign and mailbox settings and shows which limit sets it. 'Capacity under saved campaign limits' shows how much allowance remains today when that number is available. 'First emails queued today' shows how many first emails are queued for today's remaining sending windows. Pauses and delivery checks can still hold queued emails. Emails held by a daily cap can move to a later sending window. Limits count sends from the moment they are saved.
Auto-ramp and Reply Capacity
The 'Auto-ramp' card sets the campaign's daily send cap each morning, so a new campaign starts low and grows only while things go well. The cap is the lowest of five limits: 'Mailbox capacity', 'Deliverability', 'Lead supply', 'Reply capacity' and 'Budget'. A limit with a green chip has room to grow, amber holds the cap and red lowers it or pauses a sending domain. The cap is written into Sending limits as the campaign daily total. There are three modes. 'Off' changes nothing and shows today's limits as a preview. 'Propose' proposes each due step for the next sending day; you approve it that day and it takes effect the next morning, and a proposal you do not answer keeps the cap where it is. 'Automatic' steps up by itself once every limit has been green for the set number of sending days. In every mode, holds, step-downs and domain pauses happen straight away. Reply capacity keeps the pace at a level your team can keep up with: set 'Replies you can answer per day' and 'Reply time', and the cap stays low enough that the expected replies can be answered within that time. Until the campaign has sent enough to measure its own reply rate, your assumed reply rate is used. Leave the replies field empty for no reply limit. If the campaign already has a fixed ramp in Sending limits, switching auto-ramp on asks you to replace it.
Optional Pause on a Low Reply Rate
The 'Low reply rate' card shows how many people this campaign has emailed, how many replied, and the reply rate: people who replied divided by people emailed. It can also pause the campaign for you. 'Pause automatically on a low reply rate' is Off by default, and then the campaign keeps sending whatever the reply rate. When you switch it on, choose the 'Lowest acceptable reply rate' and the 'Minimum people emailed before pausing'. The campaign pauses itself once it has emailed at least that many people and the reply rate is below your chosen rate. People first emailed in the last 48 hours are not counted yet, because replies take time to arrive, so the rate on the card can sit below your chosen rate for a while without a pause. After an automatic pause, review the copy and resume the campaign yourself; the check then waits for the same number of people again before it judges.
Generating AI Openers Before Launch
If the campaign's emails use an AI opener, the 'AI openers' card shows the personalised opening line and subject each contact will receive. Generate them before launch so nobody gets the fallback text. The card counts openers that are ready, generating, failed, missing, on 'Template fallback' or stale. The generate button queues every missing opener; each one uses AI credits, and it runs in the background and takes a few minutes, so refresh the card to see the results. 'Template fallback' means no reliable personalised line was available, so the template text will send; you can write a verified line yourself with 'Write one' or edit any generated line. A line becomes stale when the prompt or steer changes; regenerating it uses credits again, and lines you edited are kept. If AI personalisation is turned off in your email settings, openers cannot be generated and the template text is used. Changing automatic capitalization on an approved campaign changes the approved copy, so approve the new version afterwards.
Refreshing SEO reports and what it costs
The 'SEO reports' card shows the reports for your campaign. When you include SEO reports, each email links to an SEO report for the recipient’s website. The link normally stays open for seven days after the first email. You can extend public access before sending. 'Refresh reports' runs a new SEO report for each website this campaign can send to. Each new report is a new run, so it is charged again at the normal report price, even if the website had a report before. The card shows the price per report, the total for the batch and your credit balance before you confirm with 'Review cost and refresh', and credits are charged only once each report is ready. A report that fails is not charged. Websites that already have a fresh report, made in the last 30 days and still public, are skipped and not charged unless you turn on 'Refresh them anyway'. 'Refresh in stages' runs 5, then 10, 20, 50 and the rest, so you can check each batch before spending more, and the run stops at the first failure. Contacts left out by the audience-quality rules get no new report, and contacts whose report could not be made are held: they are not sent and not charged until their report exists.
Approving Copy and Subject A/B Pairs
The 'Approved copy' card makes sure the campaign only sends words that were reviewed and approved. If you edit an email's subject, text, sign-off, greeting or AI opener settings, the card shows what changed since the approved version. Review a dry run of the new copy, then choose 'Approve new version' and record where the dry run can be found and its fingerprints; the dry run must be of exactly the copy shown, or the approval is refused. The earlier version stays in the version history. Audience, exclusions, mailboxes and schedule can change without approval, and a version cannot be approved while a send is in progress. The 'Subject A/B' card pairs 'Subject A' with a 'Subject B' on any email step. Each contact gets subject A or B on every step that has a pair, split 50/50 and fixed per contact, and subject B is part of the approved copy. On a cold campaign subject B only sends after it is frozen, the copy has to be frozen first, and freezing must happen before the first send: 'Freeze and start all pairs' locks the subject B wording, which cannot be changed afterwards.
Pre-launch Checks and Launch
The 'Pre-launch checks' card lists six checks that catch the mistakes that hurt most once mail is out: 'The version you send is the one you approved', 'Sending plan signed off', 'Volume and spend limits set', 'Sending mailboxes rechecked', 'Emails follow the cold-email rules' and 'Someone owns the stop rules'. They apply to your whole account, so every campaign shows the same list. Choose 'Record as done' on each one, with an optional evidence note of up to 500 characters that is kept in the audit log with your name and the time. By default the list is guidance only and campaigns can still launch. Switch on 'Require all pre-launch checks before sending' to make it a hard stop: no campaign in your account can launch until all six are recorded, and a refused launch lists the missing checks. If your account uses a cold send envelope, it enforces all six checks at launch and at send time whatever that setting says, and checks recorded there cannot be withdrawn. Last, look at 'Launch checks' on the campaign page: it says whether anything would refuse the launch or stop emails going out. Content, bounce rate and your monthly send quota are checked again when you launch.
Related Articles
Email Campaigns
Learn how to create, schedule, and manage email campaigns from the campaigns worktable.
Send Safety: Automatic Pauses and Emergency Stop
How automatic pauses and the emergency stop protect your sender reputation, and how to resume.
AI Personalization
How AI-written opening lines and subjects are generated for each contact.
Email Accounts
Learn how to connect, manage, and troubleshoot your email sending accounts. Configure SMTP and IMAP for full sending and inbox monitoring.